DYNTEK CoilMesh
 
 

DYNTEK CoilMesh is used for the reinforcement of brickworks and blockworks by embedding in
mortar joint between courses of bricks or blocks. It can also be used as plaster reinforcement over conduits and services.

DYNTEK CoilMeshes are manufactured from BS 2989; 1982 conforming pre-galvanised steel into expanded steel mesh. In addition, stainless steel material conforming to BS 1449: Part 2: 1983 Grade 304S15 specifications is also available on request.

 

Benefits

Enhanced Durability of Walls
DYNTEK Coilmesh provides extra strength to walls, footings and parapets, with additional resistance to stresses, vibration and temperature changes.

 

Product Code
Widths (mm)
Lengths (m)
Remarks / Materials / Thickness
CM50/100
50
100
Continous coilform
Galvanised Steel
0.5mm thick
CM65/100
65
100
CM100/100
100
100
CM114/100
114
100
CM150/100
150
100
CM178/100
178
100
CM200/100
200
100
BRM2/65/0.5
65
22
2.44m x 9strips / Coil
Galvanised Steel
0.5mm thick
BRM1/65/0.3
65
22
2.44m x 9strips / Coil
Galvanised Steel
0.35mm thick
BRM1/100/0.3
100
22
BMS65/0.5

BMS65/0.7
65
1.22
1.22m strip x 100 pcs / pack

Galvanised Steel

0.35mm thick
0.7mm thick
BMS100/0.5

BMS100/0.7
100
1.22
BMS150/0.5

BMS150/0.7
150
1.22
BMS200/0.5

BMS200/0.7
200
1.22

 

Notes

  • CoilMesh is recommended at every third or fourth course of brickwork and at first or second course of blockwork
  • Selection of coil width should be 25-50mm lesser than that of wall width
  • When joining two lengths of CoilMesh, a minimum overlap of 75mm is required

Dyntek Pte Ltd 2008-2011 © All Rights Reserved.